IVAN #9 Rivets & Burrs
#9 heavy-weight rivets and burrs in three sizes and two material options.
Specifications
Cap: 12mm (1/2")
Size: 12mm (1/2")/ 20mm (3/4")/ 25mm (1")
Option: Solid Copper/ Solid Brass
Pack Size: 10/PK; 50/PK
How to install
1. Place the rivet into a pre-punched hole, with the flat portion on the good side of your leather.
2. Position the washer on the rivet.
3. Look at the end of your setter. There is a hole on one side and a flattened dome on the other. Place the hole over your rivet.
4. Use a rawhide mallet (20oz recommended) to hammer down the washer, until it's firm against the leather.
5. Snip off the excess rivet with pliers (Ivan rivet cutting pliers recommended).
6. Place the flattened dome end of the setter over the washer and hammer hard with the mallet until the rivet is set.
Original: $9.57
-65%$9.57
$3.35
Description
#9 heavy-weight rivets and burrs in three sizes and two material options.
Specifications
Cap: 12mm (1/2")
Size: 12mm (1/2")/ 20mm (3/4")/ 25mm (1")
Option: Solid Copper/ Solid Brass
Pack Size: 10/PK; 50/PK
How to install
1. Place the rivet into a pre-punched hole, with the flat portion on the good side of your leather.
2. Position the washer on the rivet.
3. Look at the end of your setter. There is a hole on one side and a flattened dome on the other. Place the hole over your rivet.
4. Use a rawhide mallet (20oz recommended) to hammer down the washer, until it's firm against the leather.
5. Snip off the excess rivet with pliers (Ivan rivet cutting pliers recommended).
6. Place the flattened dome end of the setter over the washer and hammer hard with the mallet until the rivet is set.
