IVAN #12 Rivets & Burrs
#12 heavy-weight rivets and burrs in three sizes.
Specifications
Cap: 9.5mm (3/8")
Size: 12mm (1/2") / 20mm (3/4") / 25mm (1")
Option: Solid Copper / Solid Brass
How to install
1. Place the rivet into a pre-punched hole, with the flat portion on the good side of your leather.
2. Position the washer on the rivet.
3. Look at the end of your setter. There is a hole on one side and a flattened dome on the other. Place the hole over your rivet.
4. Use a rawhide mallet (20oz recommended) to hammer down the washer, until it's firm against the leather.
5. Snip off the excess rivet with strong, sharp pliers
6. Place the flattened dome end of the setter over the washer and hammer hard with the mallet until the rivet is set, and the cut end of the rivet is smooth.
Original: $9.57
-65%$9.57
$3.35
Description
#12 heavy-weight rivets and burrs in three sizes.
Specifications
Cap: 9.5mm (3/8")
Size: 12mm (1/2") / 20mm (3/4") / 25mm (1")
Option: Solid Copper / Solid Brass
How to install
1. Place the rivet into a pre-punched hole, with the flat portion on the good side of your leather.
2. Position the washer on the rivet.
3. Look at the end of your setter. There is a hole on one side and a flattened dome on the other. Place the hole over your rivet.
4. Use a rawhide mallet (20oz recommended) to hammer down the washer, until it's firm against the leather.
5. Snip off the excess rivet with strong, sharp pliers
6. Place the flattened dome end of the setter over the washer and hammer hard with the mallet until the rivet is set, and the cut end of the rivet is smooth.
